China maleic anhydride|fumaric acid|succinic acid|Glyoxylic Acid |Hpma manufacturers

F20-1 lamella antirust oil

Name:F20-1 Lamella Antirust Oil

Product Component:
This product is produced by taking the refined mineral oil as the base oil and compounding many kinds of antirust additives and other additives.
Product Characteristic:
This product is a brown oily liquid. When use, the oil consumption is few, the oil film is thin, transparent, artistic, easy to clean and break seal and easy to operate. For the general steel, the antirust period can reach 2 years, the copper's can be 1 year and the oil terms of validity is 1 year.
Use:
This product is suitable for the steel, copper, aluminum alloy, silver-plating, lead plating,cadmium plating, surface bluing and so on many kinds of metals work pieces and their assembly products, like the seal and antirust of the oil seal parts of the bearing, the measuring instrument,the cutting tool and the machine tool's.
Directions for Use:
•  Long-term seal up for keeping and antirust:
1. Use the oil preparation to clean before antirust : use the gasoline or the petroleum to wash the parts and components first, then filtrate and clean them(30%-40% steam, petroleum add 60%-70% F20-1), at last coat this product and pack to seal.
2. Use the water to clean before antirust: use the water to clean the parts and components, it is better to use the CT-2 to take off the moisture first then to coat the oil and pack to seal again.
•  The short-term antirust between working procedures: the clean procedure is similar to the long-term seal up for keeping, then coat the oil according to the length of the needed antirust time, suitably dilute this product with the petroleum and the gasoline then.
•  May use the methods like soaking,spray painting or brush painting to carry on the oil coating.
Quality Standard: Q/320400    GH030-2001
Quality Index:

Item

Index

Test Method

Appearance

Brown oily liquid

Test by eyes

Oil base stability

Qualified

SH/T0214

Moisture % ≤

Trace

GB260

Salt spray test (hour)

10 #sheet steel ≥

48

SH/T0081

H62 copper sheet ≥

48

lamination Test (day) 49 ± 1 °C

Sheet steel≥

7

Q/320400GH030(4.8)

Heat and moisture test (day)
49 ± 1 °C

10 #sheet steel ≥

14

GB/T2361

H62 copper sheet ≥

14

LY12 aluminum sheet≥

14

Corrosion test (day)
49 ±°C

Sheet steel ≥

7

SH/T0080

Copper sheet ≥

7

Aluminum sheet ≥

7

Sweat substitution property( 1 day)

Sheet steel

Qualified

SH/T0311

Precautions:
•  This product should store in the room and avoid blending with water and other rabbish. 
•  Before liquoring,make sure the working pieces are clean and dry.
•  The liquoring working pieces must well packed.
Packing:
170kg iron drum/18kg plastic drum.